Industrial Extraction Arm

  • Movex

    Model: PR

    The ideal extractor for industrial environments

    Developed using new materials and new technology, designed with a focus on new and significant advantages:

    • Unique ease of manoeuvrability
    • High positional stability
    • Optimally hood design for welding smoke and other hot pollutants
    • Maximum capture efficiency and extraction

    PR design is based on Movex’s basic principles:

    • External arm supports
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Supplied partially assembled for ease of installation
     >
  • Movex

    Model: PRX

    Efficient and easy to maneuver

    PRX – A local extractor that comes with many advantages;

    • Extremely easy to maneuver and great positional stability.
    • Unique knob for adjusting the friction joints by hand.
    • 360° swivel function.
    • Optimal hood for welding smoke and other hot pollutants.
    • Maximum capture efficiency and extraction.
    • Maximum reach.

    Movex basic principle of local exhaust ventilation is construction with external support arms, which provides for:

    • Low pressure drop
    • Low risk of clogging

    The local extractor is supplied partially assembled for ease of installation.

     >
  • Movex

    Model: PRB

    The ideal bodywork extractor

    Developed for effective evacuation of welding fume, grinding dust and vapors when performing vehicle bodywork.

    New technology in combination with new materials and a focus on design gives Movex PRB many new and important advantages:

    • Unique ease of manoeuvrability
    • High positional stability
    • 360° movability
    • Easy to position below the vehicle body
    • Hood designed for maximum capture efficiency and extraction.

    PRB design is based on Movex basic principles:

    • External arm supports
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Supplied partially assembled for ease of installation.
     >
  • Movex

    Model: PRG

    Local extractor for industrial environment

    Movex PRG is based on the PR arm,  new technology combined with new materials and focus on design provides Movex PRG many new and valuable benefits:

    • Uniquely maneuverable
    • Extremely stable position
    • Hood in PVC.

    PRG is designed according Movex fundamentals:

    • External arm support
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Partly assembled upon delivery, for simple installation.

    PRG can be equipped with control gear for controlling fan/damper.

    Movex PRG is available in lengths 7, 10, & 13 feet.

     >
  • Movex

    Model: TEXAS

    Telescopic local extractor for confined workplaces

    • A compact extractor for welding booths and workbenches
    • Gas spring balances the weight of the arm
    • Flexible suction nozzle rotates through 360° and can be positioned at a 90° angle

    TEX is designed based on Movex’s basic principles:

    • External arm supports
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Supplied pre-assembled for ease of installation
     >
  • Movex

    Model: RX RF

    Easy to maneuver and efficient Stainless steel local extractor

    Movex RX RF is manufactured fully in stainless steel and has a reinforced PE hose for the best chemical resistance.

    The smooth inside of the suction tubes makes the RX RF very easy to clean. Adjustments of joints, as well as, maintenance can easily be taken care of with hand tools from the outside.

    • Stainless steel
    • Easy to maneuver and positional stability
    • Gas spring balances the dead weight of the arm
    • Flexible suction nozzle rotates through 360° and can be positioned at a 90° angle

    RX RF design is based on Moxex basic principles:

    • External arm support
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Supplied partially assembled for ease of installation

    The Movex RX RF is easy to install and can be delivered with brackets for ceiling mounting. Available in lengths 5, 7, 10 and 14 feet.

     
     >
  • Movex

    Model: PR EXC/EXD

    Local extractor for workplaces requiring safe handling of explosive gases and dust

    The PR EXC/EXD has the same unique features and design as PR.

    The differences lays in the grounded structure and that PR EXC/EXD meet the requirements of the ATEX Directive 94/9/EC Category 2 for gases and dust:

    • Zones 1 and 21
    • EX II 2 GD marking

    The PR EX is available in two versions:

    • EXC with black chemical resistant PE hose.
    • EXD with semi-transparent white PU hose for dust-related pollutants.

    PR for ATEX environments is designed according to Movex’s basic principles:

    • External arm supports
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Supplied assembled and tested
     >
  • Movex

    Model: R / RZ EXH

    Local extractor for explosive environments

    R EXH and RZ EXH are constructed with:

    • Structure, brackets and conical hood in stainless steel SIS2348 (316L)
    • Flexible conductive PU hose R<109?
    • Gas spring in stainless steel that balances the arms weight.

    Movex basic principle of local exhaust ventilation is construction with external support arms, which provides for:

    • Low pressure drop
    • Low risk of clogging

    Movex R EXH and RZ EXH meet the requirements of the ATEX Directive 94/9 / EC category 2 for gases and dust.

    Movex R EXH and RZ EXH is available in Ø100, 125, 160 and 200 mm hose dimension according to requirements.

     >
  • Movex

    Model: R/RZ EXHC

    Corrosion-resistant local extractor for workplaces requiring safe handling of explosive gases and dust

    Used in corrosive environments and manufactured entirely from stainless steel components:

    • Grounded structure
    • Full fills requirements for ATEX directive 94/9/EC category 2 for gases and dust
      • Zones 1 and 21
      • EX II 2 GD marking

    The local extractor is designed based on Movex’s basic principles:

    • External arm supports
      • Natural and direct airflow means minimal pressure drop
      • Low risk of blockage
    • Supplied assembled and tested